cat# B5022 An exclusive BUXCOMM Master Match Mobile BALUN
Here is the Mobile BALUN designed for serious HF mobile operator's. We include a coax jumper terminated with a PL259 at one end and ring-terminal connectors at the other end.
All items shown in the photo are included with the BUXCOMM B1K5022.
We designed this asymmetrical to asymmetrical B5022 for use with both:
screw-driver type and end (bottom) fed vertical mobile antennas.
Install this BUXCOMM mobile B1K5022 where it counts and where every watt is important.
The BUXCOMM B1K5022 puts the RF power into your mobile antenna to radiate.
Without an asymmetrical to asymmetrical UNUN at the input of your mobile antenna,
much of the RF power can become reflected (lost) power (VSWR).
The mobile radio operator's finds the BUXCOMM B1K5022
to be an asset when feeding the mobile antenna. Enjoy maximum
transfer of RF energy to your antenna for new found coverage and
DX mobile communications.
This HF mobile BALUN covers 1.8 MHz. through 35 MHz. This BUXCOMM
Master Match Mobile 5022 is rated at 1000 watts SSB. Our new BUXCOMM B1K5022
will match 50 ohms to lower impedances from 1.5 MHz to 35 MHz.
More than 95% of all HF mobile antennas exhibit a low impedance input, between 12 NOTICE: If your screw-driver antenna requires phantom voltage (DC) on the coax
and 32 ohms. Our new BUXCOMM model B1K5022 HF mobile BALUN will match 50 ohm
coax to mobile antennas having impedance(s) from 12 to 33 ohms. I designed this
asymmetrical to asymmetrical B1K5022 for mobile applications because most mobile
antennas exhibit a very low input impedance.
feed-line to run the DC motor of your screw-driver antenna, this BALUN will not pass DC,
and should not be used where phantom DC voltage for the DC motor is fed via the coax.
*Style and color may vary. Performance per above specs.